The NCS-C250 Mobile Multi-Switcher is an
interoperability solution suited for First
Responders that utilize multiple radios such as
police, fire and EMS personnel. However, many
customers have purchased the unit for dispatch
purposes. The unit connects four radios to one
microphone and two speakers. Specific features
such as crossband repeating of up to 4 radios
(VOX operated), Select/Unselect audio control and
muting, and PA output make the unit more than
a "microphone switch".

The NCS-C250 can be configured in systems to provide for sharing of radios between
multiple units thereby reducing the number of radios required,
resulting in a reduction of overall system cost. Alternatively, the unit
may be combined with an NCS-C251 Expansion Unit for control of up to
eight radios.

Options

The NCS-C250 and NCS-C251 are available with several optional features to enhance
their operation. All options are factory installed.

COR: Carrier detect circuit for crossbanding function. The option causes
the RPT Function to be controlled by a digital busy signal from each radio.
Highly recommended for significant improvement in quality of
crossbanding. VOX detection comes standard.
Hook Switch: The option allows a hook switch or microphone hang up
signal to be sent from the mic to all radios. The signal is passed to Selected
radio(s) when the microphone is "Off-Hook". Worthwhile for set ups with
radios programmed to scan or monitor when not in use.

Multi-Cast (Simulcast): Provides the ability to broadcast on multiple radios
simultaneously. This feature may be enabled or disabled by the user.

Sidetone: Mixes the transmit (mic) audio at a suppressed level with the
Selected radio’s receive audio to provide aural feedback when using a
headset. The Sidetone signal is also output to the selected speaker to allow
remote monitoring or recording of both sides of the radio communications.
This feature can be enabled or disabled by the operator.

Accessories
Headsets

NCS is proud to offer Heil Sound, Ltd.© headsets and accessories for use with our
products. Heil Sound has supplied its products to the commercial broadcast,
entertainment and amateur radio industries for over 30 years and has a superb
reputation for innovative and quality audio products.

Pro-Set4. The NCS-E304 and NCS-E305 (electret version) headsets
havestereo speakers, perfect for monitoring Selected and Unselected audio.
The set contains a speaker phase reversal switch to reduce fatigue and
enhance intelligibility. The microphone element has an optimized
frequency response for clear voice articulation even under noisy radio
conditions. The flexible left ear microphone boom has a variety of
positions.
Pro-Set Plus! The NCS-E345 and NCS-E346 (electret version) are more
robust versions of the NCS-E304 and NCS-E305 headsets. The Pro-Set Plus!
has dual microphone elements for full range and enhanced
communications. A slide switch provides switching between elements.

Additionally, the boom swings 180 degrees for left or right operation. The
headset contains a self adjusting cushioned headband.

Pro-Set Quiet Phone. The NCS-E314 and NCS-E315 (electret version)
include all the attributes of the Pro-Set 4 and adds active noise cancellation
technology to reduce ambient room noise. The unit includes an integrated
Push-To-Talk soft touch switch. The set is supplied with a leatherette carry bag.

HS-2 "Magnum" PTT Hand-Switch The NCS-F230 is used with the Pro-Set 4
or Pro-Set Plus! and is ergonomically designed to comfortably fit the hand.
The rugged switch has chrome spring strain relief on both ends of its
cable.

Microphones

Hand Microphone The NCS-E216 is an omni-directional hand mic. It comes
with a metal hangar and clip for Hook Switch operation. The
coil cord is about 3 feet.

DTMF Microphone The NCS-E214 is a DTMF encoder
microphone with an illuminated 12 key alphanumeric
keypad. Features include an audible sidetone
confirmation and automatic muting during tone
transmission. The unit has a metal hanger and a
removable 3 foot coil cord.

Other Accessories

Radio Cables. NCS provides cabling to interface most commercial and
amateur radios with the NCS-C250. Cables can be provided for
mobile as well as portable radios. The cables come in a
standard length of 6 feet, however custom lengths are
available.
Mono-Audio All audio (Selected & Unselected) is routed to both speaker
ports. Great for single speaker applications.

Audio & PTT Delay Module The C410 Delay Module provides a user
selectable audio delay to accommodate inherent delays seen in trunked
systems between receipt of PTT and assignment of channel. Delays
of 0, 50, 100, 200, 400, 800 & 1600 msec are selectable.

AC Power Supply The NCS-1516 is a desktop switching power supply with
overvoltage and current limit protection. It's input is 120
VAC and its output is 12VDC at a maximum of 3 Amps.

Speakers The NCS-7210 is an 8 Ohm, 3 Watt speaker
for use with the C250. It comes with a 3 foot cord. Two speakers
are recommended for Selected and Unselected audio. An adapter
(NCS-250-SPKR) is available to connect two speakers to the NCS-
C250.