Vehicle Equipment

Designed to MIL-STD 810G test procedures and complies with FCC Class A standards Small footprint - designed to maximize available space inside of vehicle Gamber-Johnson has worked with Panasonic to perform the appropriate tests needed to qualify a product as Toughbook Certified Rear-facing l/O ports, integrated cable strain relief system, and convenient cable management system Spring-loaded docking connector to ensure connectivity in the roughest terrain Front safety bracket and rear corners ensure proper alignment and docking connectivity Spring-loaded plate protects RF connector from damage when computer is not in the docking station. Plate draws back into the docking station when the computer is docked. This docking station accommodates the optional modular expansion area on the Toughbook 54/55 computer Special access area for smart card reader makes it easy to insert and eject card Push button latch with keyed lock for theft deterrence: Push the latch to release the docking connector Insert computer and push latch closed to dock computer Can be used with Motion Attachments with the VESA 75mm hole pattern only Rugged composite/steel construction with black powder coat finish for long-term durability Antenna switch position: Switch set toward outside of dock: Uses exterior antenna Switch set to inside of the dock: Uses laptop antenna

Compatible with Panasonic Toughbook 33 tablet VESA 75mm hole pattern. Can be mounted in horizontal or vertical position. Internal/protected circuit board protects against dirt and dust. Floating docking connector for reliable docking connection. Optional lock (keyed alike) for theft deterrence. Optional cradle version (no ports). Accommodates either a tablet’s hand strap or an additional battery pack. Rounded edges to enhance personal safety. Rugged construction for long-term durability. Can be used with Lind 120W automobile power supply ( 7300-0462 ) or Lind 120 W bare wire leads power supply ( 7300-0461 ).

Compatible with the Panasonic Toughbook 20 and G2 2-in-1 tablet computers with attachable keyboards Panasonic Certified electronics Spring-loaded cover protects docking connector when computer is not docked, automatically retracts for superior protection Special docking connector pin protection – helps to prevent accidental pin damage by providing additional protection around and in between each docking pin Can be used in either laptop or tablet orientation. Composite/aluminum design for reduced weight and durability Designed with rounded edges to enhance personal safety Rear-facing I/O ports; integrated cable strain relief and cable management system Access to all notebook control buttons and ports while the notebook is docked Keyed lock for theft deterrence. NOTE: The lock secures the Toughbook 20 keyboard and tablet, but secures only the keyboard for the G2. VESA 75 mm mounting pattern 3-year limited warranty

Compatible with the Getac K120 computer with keyboard Kit includes NO RF docking station (7160-1082-00) + Getac 120W auto power adapter ( 7300-0471 ) Docking Station design accommodates MSR and rotating hand strap (sold separately) Rear corner release button, easily remove the computer with the push of a button Access to all computer control buttons and ports while the computer is docked Forward-facing I/O ports; integrated cable strain relief and cable management system Floating docking connector for reliable connectivity in the most rugged environments Optional lock (keyed alike) for theft deterrence. When the computer is closed and screen is latched, the lock will secure the keyboard and computer Rounded edges to enhance personal safety Gamber-Johnson rugged construction and reliability VESA 75mm mounting pattern

Compatible with the Panasonic CF-33 Toughpad Kit includes (item no. 7160-0907-06) NO RF docking station + (item no. 14103) LIND 120V auto power adapter Easy to use one-handed operation: Insert bottom of computer into the docking station, push top of computer against latch button until latch engages To remove, push up on latch-button with thumb to disengage and pull computer out of the docking station Can be used in horizontal or vertical position Floating docking connector for a reliable connection even in extreme environments Accommodates either a tablet’s hand strap or an additional battery pack. Optional keyed lock for theft deterrance Alignment tabs prevent damage to docking connector when docking the computer. Vesa 75mm mounting pattern Rounded edges to enhance personal safety

Space saving and ergonomic design improves safety and comfort. CNC machined aluminum construction for rugged reliability. Easy, one handed operation. Top mounted USB ports for compatibility with “Clamshell” mounts. Compatible with Panasonic CF-33 Toughpad tablets without external accessories VESA 75mm hole pattern. Internal Panasonic circuit board for device compatibility. Floating, protected docking connector for reliable docking connection. Flex lock (keyed alike) feature for theft deterrence. Optional cradle version (no ports) available. Available with power indicator light when purchased as kit with PSU.

Compatible with the Panasonic Toughbook 20 and G2 2-in-1 tablet computers with attachable keyboards Panasonic Certified electronics Spring-loaded cover protects docking connector when computer is not docked, automatically retracts for superior protection Special docking connector pin protection – helps to prevent accidental pin damage by providing additional protection around and in between each docking pin Can be used in either laptop or tablet orientation. Composite/aluminum design for reduced weight and durability Designed with rounded edges to enhance personal safety Rear-facing I/O ports; integrated cable strain relief and cable management system Access to all notebook control buttons and ports while the notebook is docked Keyed lock for theft deterrence. NOTE: The lock secures the Toughbook 20 keyboard and tablet, but secures only the keyboard for the G2. VESA 75 mm mounting pattern 3-year limited warranty

Compatible with Getac's B360 and B360 Pro rugged computers Getac Certified electronics Floating docking connector with steel guide pins to ensure a reliable connection even in the most rugged environments Front corner release latch, easily remove the computer by activating the latch Access to all computer control buttons and ports while the computer is docked Rear-facing I/O ports; integrated cable strain relief and cable management system Screen support for additional stability (included) Keyed lock for theft deterrence VESA 75mm mounting pattern Rounded edges to enhance personal safety 3-year limited warranty Available with NO RF (Item No. 7170-0789-00)

Uses Panasonic Toughbook Certified electronics for reliable connectivity Access to all computer control buttons and most ports while docked Rear-facing I/O ports; integrated cable strain relief and cable management system LED indicator light reflects docking connection to ensure proper docking Shutter cover for extra docking connector protection Designed to the footprint of the computer to preserve cabin space Right-facing docking/release latch for easy docking and undocking Keyed lock for theft deterrence Gamber-Johnson rugged construction and reliability Composite design for reduced weight and durability VESA 75mm mounting pattern for compatibility with a variety of Gamber-Johnson motion attachments

Compatible with Panasonic Toughbook 54 and 55 computers Integrated genuine Panasonic PCB and connector for trouble free service Aluminum construction for strength and durability Auto-retracting docking connector cover reduces potential damage to critical components Floating connector for reliable docking connection Rear-facing I/O ports with Integrated cables restraint/cable management system Captured key lock with auto-latching mechanism ensures user safety, protection and device security Universal mounting interface including VESA 75 for optimum compatibility with new and existing infrastructure Ergonomic design for safety and single hand operation Minimal footprint for increased usable cabin space Available with dual RF antenna pass through

Horizontal mounting space is shortened to increase accessibility to gun mounts and equipment Lowered top plate maintains accessibility to optional rear HVAC controls (Ford 17A ordering option) Easy installation with no OEM parts to be removed Console sits low between the front seats to create a more comfortable workspace and ease of egress Relocation faceplate for OEM 12V, USB, AUX 12V, and switch knockout included

Wide body design maximizes mounting space Push-button locking storage compartment keeps valuables safe and includes one rectangular cutout and one 12V outlet cutout Simple and fast, no-drill install as the console is specific to vehicle using existing mounting points saving you time and money Computer and devices can be easily mounted to the 3-hole pattern on either driver or passenger side Includes three 12 volt plug knock-outs, three USB power ports, and two mic mount locations *Fit may vary if OEM console option is present *OEM relocation is located on the passenger side of the console box

Narrowed width creates extra clearance for seat belts and gun holsters Simple and fast no-drill installation Sloped front increases visibility of radios and controls Knockouts for 12V outlets and accessories are included on the top, passenger side, and back side of the console 3-hole patterns on the top of the console allows for easy installation of motion attachments

Full depth accommodates one-piece radios and controls Flat design increases ease of egress in emergency situations Side mount configuration maximizes in-console mounting space Easy installation, no OEM parts to be removed Padded armrest flips up for convenience

Shortened length provides extra clearance for weapon retrieval Installs easily with no drilling required Featuring a removable top plate for easy installation of radios and wire routing 3-hole pattern included on the top plate provides a secure mounting location for motion attachments OEM Power option can be relocated with supplied 2” faceplate or passenger side of console The Mongoose® XLE 9" Motion Attachment features a 365 degree swivel with additional forward travel of the clevis (about 4 inches beyond the arm) and locks in place every inch, keeping devices secure and at optimal accessibility Dual cup/pen holder is removable for easy cleaning Break-Away Armrest slides forward 2" for optimal comfort and can be flipped up or swiveled to the side for convenience