Commercial

The Outliner™ Series distributes a bright output to increase visibility on running boards, push bumpers, or any other perimeter location. The dual-color lightheads produce 32 flash patterns, including steady burn, as well as a phase one and two synching capability. Units include separate wires for dim and steady-burn override. The Outliner features high-grade, powder-coated aluminum housing, sealed weather-resistant lightheads and a jacket-enclosed 55” cable. PLEASE NOTE THIS IS NOT A CLASS 1 LIGHT! THIS SHOULD BE USED FOR SUPPLEMENTAL USE, NEVER AS PRIMARY WARNING FOR ROADWAY, WARNING.

This warm performance soft shell combines superior weather protection with the highest class of visibility.100% polyester woven shell with durable water-repellent (DWR) finish bonded to a water-resistant breathable film insert and a 100% polyester microfleece lining Black bottom front and lower sleeves for a cleaner appearance Fabric waterproof rating: 5000MM Fabric breathability rating: 5000G/M2 Full-length interior storm flap with chin guard Durable reflective 2-inch tape meets ANSI 107 requirements and provides 360-degree visibility on body and sleeves; tape is bonded to fabric Molded right chest hand and center front zippers with rubber pulls Mic clips at shoulders Elastic cuffs with adjustable hook and loop closures and rubber tabs Adjustable drawcord hem This garment must be fully zipped to be in compliance with ANSI 107 standards

100% polyester 300-denier ripstop shell with durable water-repellent (DWR) finish 100% polyester lining Black bottom front and lower sleeves for a cleaner appearance Shell's fabric waterproof rating: 5000MM Fully seam-sealed shell Adjustable rain hood Durable reflective 2-inch tape meets ANSI 107 requirements Full-length interior and exterior storm flaps Vented cape back Right chest pocket and retractable ID holder Two lower front pockets Center front zippered pocket to hold a tablet Gusseted cuffs Elastic hemDecoration access pocket in shell Non-ANSI 8.6-ounce 100% polyester inner full-zip hoodie Hoodie can be attached inside shell This garment must be fully zipped to be in compliance with ANSI 107 standards

100% polyester 300-denier ripstop shell with durable water-repellent (DWR) finish 4.6-ounce 100% poly microfleece upper body lining 3-ounce quilted polyfill lower body lining 2-ounce quilted polyfill hood and sleeve lining Black bottom front and lower sleeves for a cleaner appearance Fabric waterproof rating: 5000MM Fully seam-sealed Adjustable rain hood Durable reflective 2-inch tape meets ANSI 107 requirements Full-length exterior storm flap Left chest pocket Right chest pocket Two lower front pockets Center front zippered pocket to hold a tablet Mic clips at shoulders Elastic cuffs Elastic hem Decoration access pocket This garment must be fully zipped to be in compliance with ANSI 107 standards

100% polyester woven 300-denier oxford shell with durable water-repellent (DWR) finish 5.2-ounce 100% polyfill insulation box diamond quilted body and sleeve lining Black bottom front and lower sleeves for a cleaner appearance Fabric waterproof rating: 5000MM Fully seam-sealed Adjustable zip-removable rain hood with hook and loop closure and toggles Durable reflective 2-inch tape meets ANSI 107 requirements and provides 360-degree visibility Full-length exterior storm flap Left chest bellows pocket Two open lower front pockets Molded center front zippered closure Elastic cuffs Elastic hem Decoration access pocket This garment must be fully zipped to be in compliance with ANSI 107 standards

Stay safer in inclement weather in this high-visibility windbreaker. ANSI/ISEA 107 Class 3 certified Water resistant 100% PU shell 100% polyester backing 8000MM fabric waterproof rating Snap-off hood with drawcord and toggle for adjustability Two-way black Vislon zipper Internal storm flap Half-elastic adjustable tab cuffs with hook and loop closures 2-in. wide reflective taping on front back and sleeves Two welt pockets Drawcord hem with toggle adjustability This garment must be fully zipped to be in compliance with ANSI/ISEA 107 standards The hood must be detached and stowed when not in use to be in compliance with ANSI/ISEA 107 standards

This seam-sealed parka locks out moisture while helping ensure your safety. ANSI/ISEA 107 Class 3 certified 100% polyester shell and lining 8000MM fabric waterproof rating Fully waterproof and seam-sealed Two-way Vislon zipper Hideaway hood Storm flap with snap closure 2-in. wide reflective taping on front back and sleeves Half-elastic adjustable tab cuffs with hook and loop closures Interior pocket with hook and loop closure Two large lower pockets Drawcord waist and hem with toggle adjustability Decoration access pocket This garment must be fully zipped to be in compliance with ANSI/ISEA 107 standards

Designed for visibility this durable heavyweight hoodie is also warm and comfortable. 8.6-ounce 100% polyester smooth-faced fleece Black bottom front and cuffs for a cleaner appearance Durable reflective 2-inch tape meets ANSI 107 requirements and provides 360-degree visibility on body and sleeves Three-panel hood with drawcord closure Taped neck Front pouch pockets Molded center front zippered closure Rib knit cuffs and hem This garment must be fully zipped to be in compliance with ANSI 107 standards

Enhanced visibility joins moisture-wicking performance in this layerable worksite basic.5.5-ounce 100% polyester smooth-faced fleece Moisture-wicking Black bottom front and lower sleeves for a cleaner appearance Three-panel hood with drawcord adjustable closure Taped neck Front pouch pocket Rib knit cuffs and hem

Built to easily hold 18 cans, this jobsite or tailgating-ready cooler has plenty of storage to keep things cool.

Fabric: 55/45 poly/polypropyleneStructure: Lightly structuredProfile: LowFeatures: ANSI/ISEA 107-certified accessory 1-inch reflective band around crown Closure: Micro hook and loop

This non-ANSI certified beanie features 3M reflective yarn for superior reflective capability.Fabric: 100% acrylic

With reflective taping on the body and sleeves for 360 of visibility this snag-proof moisture-wicking and odor-fighting polo is the ultimate in performance and lightweight comfort. Strategically-placed colorblocking 4.4-ounce snag-proof polyester Snag-proof Moisture-wicking Odor-fighting Tag-free label Flat knit collar 3-button placket Dyed-to-match buttons Mic clip at center placket Raglan sleeves Integrated reflective tape on front back and sleeves Reinforced pen pocket on left sleeve Underarm gussets for added mobility

Stay safer on the jobsite in this high-visibility t-shirt that works as hard as you do. ANSI/ISEA 107 Class 3 certified 3.7-ounce 100% polyester Wicks moisture Resists snags Rib knit crewneck and cuffs 2-in. wide reflective taping on front back and sleeves Left chest pocket for pen and notes

Stay safer on the jobsite in this high-visibility t-shirt that works as hard as you do. ANSI/ISEA 107 Class 3 certified 3.7-ounce 100% polyester Wicks moisture Resists snags Rib knit crewneck 2-in. wide reflective taping on front back and sleeves Left chest pocket for pen and notes