Gamber-Johnson

Heavy gauge steel construction for long-term durability Black powdercoat finish for maximum corrosion resistance Legs attach to both short and long MCS Top Plates (Item No. 7160-0085 or 7160-0086) Works with electric seat using full range of movement

Heavy gauge steel construction for long-term durability Black powdercoat finish for maximum corrosion resistance Installs in minutes with no drilling required Angled step moves pole away from passenger leg space Will not interfere with levers or factory installed consoles One Offset Universal Mounting Step (Item No. DS-STEP) is already included with this vehicle base. However, additional Offset Universal Mounting Steps can be ordered to stack on top of each other if needed. Multiple mounting slots allow for flexible positioning of the Offset Universal Mounting Step.

Installs in minutes with no drilling required Angled step moves pole away from passenger leg space Will not interfere with levers or factory installed consoles Heavy gauge steel construction for long-term durability Black powder coat finish for maximum corrosion resistance One Offset Universal Mounting Step (Item No. DS-STEP) is already included with this vehicle base. However, additional Offset Universal Mounting Steps can be ordered to stack on top of each other if needed.

Heavy gauge steel construction for long-term durability. Black powdercoat finish for maximum corrosion resistance. Legs attach to both short and long MCS Top Plates (Item No. 7160-0085 or 7160-0086). Leg kit is NOT compatible with legacy Ford F-150 trucks.

Installs onto the inboard and outboard passenger seat hooks in minutes with no drilling required Angled step moves pole away from passenger leg space Will not interfere with levers or factory installed consoles Heavy gauge steel construction for long-term durability Black powdercoat finish for maximum corrosion resistance Included is one (1) Offset Universal Mounting Step (item no. DS-STEP). Additional Offset Universal Mounting Steps can be ordered to stack on top of each other if needed.

Designed for the Getac T800 8.1-inch rugged tablet computers Access to all computer function buttons and ports while tablet is docked VESA 75mm and Gamber-Johnson mounting  patterns located on the back of the dock POGO pin style docking connector for easy docking activation Alignment pins guide the computer for easy docking and connectivity Downward-facing I/O ports; cable strain relief system for easy cable management Docking Station design accommodates SnapBack SmartCard & RFID reader and X-Hand Strap (sold separately) Push and Turn lock with key for theft deterrence Insert computer then push down and turn lock to close and dock computer Composite/aluminum design for reduced weight and durability Use External power supply: 90W Lind Auto Adapter (Item No. 15110) 3

Designed for the Getac T800 8.1- inch rugged tablet computers Access to all computer function buttons and ports while tablet is docked VESA 75mm and Gamber-Johnson mounting  patterns located on the back of the dock POGO pin style docking connector for easy docking activation Alignment pins guide the computer for easy docking and connectivity Downward-facing I/O ports; cable strain relief system for easy cable management Docking Station design accommodates SnapBack SmartCard & RFID reader and X-Hand Strap (sold separately) Push and Turn lock with key for theft deterrence Insert computer then push down and turn lock to close and dock computer Composite/aluminum design for reduced weight and durability Use External power supply: 90W Lind Auto Adapter (Item No. 15110)

Compatible with Getac V110 convertible computer Cradle can be used in tablet or laptop position Rugged aluminum construction with black powder coat finish for long-term durability Front safety bracket helps align computer Built-in stylus holder Push button latch with keyed lock for theft deterrence: Push the latch Insert computer and push latch closed to secure computer Use External power supply: Lind Auto Adapter (Item No. 15110) Screen support is included with the dock

Cradle can be used in tablet or laptop position. Rugged aluminum construction with black powder coat finish for long-term durability. Front safety bracket helps align computer. Built-in stylus holder. Push button latch with keyed lock for theft deterrence: Push the latch Insert computer and push latch closed to secure computer Use External power supply: Lind Auto Adapter (Item No. 15110). Screen support is included with the cradle.

Attaches to the passenger side floor, under seat rails Can be used with factory installed console A Support Brace (Item no. 7160-0230) is highly recommended. Heavy gauge steel construction for long-term durability Black powdercoat finish for maximum corrosion resistance Note : Due to inboard seat rail only having one pre-drilled hole, we strongly recommend drilling another hole due to the weight of the equipment is on that rail. Rearward travel of the passenger seat is not affected, however there is limited forward seat travel.

Designed to MIL-STD 810G test procedures and complies with FCC Class A standards Small footprint - designed to maximize available space inside of vehicle Gamber-Johnson has worked with Panasonic to perform the appropriate tests needed to qualify a product as Toughbook Certified Rear-facing l/O ports, integrated cable strain relief system, and convenient cable management system Spring-loaded docking connector to ensure connectivity in the roughest terrain Front safety bracket and rear corners ensure proper alignment and docking connectivity Spring-loaded plate protects RF connector from damage when computer is not in the docking station. Plate draws back into the docking station when the computer is docked. This docking station accommodates the optional modular expansion area on the Toughbook 54/55 computer Special access area for smart card reader makes it easy to insert and eject card Push button latch with keyed lock for theft deterrence: Push the latch to release the docking connector Insert computer and push latch closed to dock computer Can be used with Motion Attachments with the VESA 75mm hole pattern only Rugged composite/steel construction with black powder coat finish for long-term durability Antenna switch position: Switch set toward outside of dock: Uses exterior antenna Switch set to inside of the dock: Uses laptop antenna

Designed to MIL-STD 810G test procedures and complies with FCC Class A standards Small footprint - designed to maximize available space inside of vehicle Gamber-Johnson has worked with Panasonic to perform the appropriate tests needed to qualify a product as Toughbook Certified Rear-facing l/O ports, integrated cable strain relief system, and convenient cable management system Spring-loaded docking connector to ensure connectivity in the roughest terrain Front safety bracket and rear corners ensure proper alignment and docking connectivity Spring-loaded plate protects RF connector from damage when computer is not in the docking station. Plate draws back into the docking station when the computer is docked. This docking station accommodates the optional modular expansion area on the Toughbook 54/55 computer Special access area for smart card reader makes it easy to insert and eject card Push button latch with keyed lock for theft deterrence: Push the latch to release the docking connector Insert computer and push latch closed to dock computer Can be used with Motion Attachments with the VESA 75mm hole pattern only Rugged composite/steel construction with black powder coat finish for long-term durability Antenna switch position: Switch set toward outside of dock: Uses exterior antenna Switch set to inside of the dock: Uses laptop antenna

Special docking connector pin protection – helps to prevent accidental pin damage by providing additional protection around and in between each docking pin Designed to MIL-STD 810G test procedures and complies with FCC Class A standards Small footprint - designed to maximize available space inside of vehicle Gamber-Johnson has worked with Panasonic to perform the appropriate tests needed to qualify a product as Toughbook Certified Rear-facing l/O ports, integrated cable strain relief system, and convenient cable management system Spring-loaded docking connector to ensure connectivity in the roughest terrain Front safety bracket and rear corners ensure proper alignment and docking connectivity Spring-loaded plate protects RF connector from damage when computer is not in the docking station. Plate draws back into the docking station when the computer is docked. This docking station accommodates the optional modular expansion area on the Toughbook 54/55 computer Special access area for smart card reader makes it easy to insert and eject card Push button latch with keyed lock for theft deterrence: Push the latch to release the docking connector Insert computer and push latch closed to dock computer Can be used with Motion Attachments with the VESA 75mm hole pattern only Rugged composite/steel construction with black powder coat finish for long-term durability Antenna switch position: Switch set toward outside of dock: Uses exterior antenna Switch set to inside of the dock: Uses laptop antenna

Designed to MIL-STD 810G test procedures Small footprint - designed to maximize available space inside of vehicle Gamber-Johnson has worked with Panasonic to perform the appropriate tests needed to qualify a product as Toughbook Certified Front safety bracket and rear corners ensure proper alignment This cradle accommodates the optional modular expansion area on the Toughbook 54/55 computer Special access area for smart card reader makes it easy to insert and eject card Push button latch with keyed lock for theft deterrence: Push the latch to release Insert computer and push latch closed to secure computer Can be used with Motion Attachments with the VESA 75mm hole pattern only Rugged composite/steel construction with black powder coat finish for long-term durability

Designed for the Getac T800 8.1-inch rugged tablet Access to all computer function buttons and ports while tablet is inserted VESA 75mm and Gamber-Johnson mounting patterns located on the back of the cradle Alignment pins guide the computer for easy cradling Cradle design accommodates SnapBack SmartCard & RFID reader and X-Hand Strap (sold separately) Push and Turn lock with key for theft deterrence Insert computer then push down and turn lock to close and secure computer Use External power supply: Lind Auto Adapter (Item No. 15110) Composite/aluminum design for reduced weight and durability

Designed for the Getac T800 8.1-inch rugged tablet Access to all computer function buttons and ports while tablet is inserted VESA 75mm and Gamber-Johnson mounting patterns located on the back of the cradle Alignment pins guide the computer for easy cradling Cradle design accommodates SnapBack SmartCard & RFID reader and X-Hand Strap (sold separately) Push and Turn lock with key for theft deterrence Insert computer then push down and turn lock to close and secure computer Composite/aluminum design for reduced weight and durability

Compatible with the Panasonic Toughpad FZ-G1 tablet computers with small bumper guards Panasonic certified electronics Docking Station is designed to perfectly fit the G1 tablet without extra accessories, thus preserving the existing cabin space within the vehicle Access to all tablet control buttons and ports while tablet is docked Easy to use one-handed docking and release, Insert bottom of computer into the docking station, push top of computer against latch button to dock computer To remove, push up on latch-button with thumb to disengage and pull computer out of the docking station Upward-facing I/O ports; integrated cable strain relief and cable management system Keyed lock for theft deterrence VESA 75mm mounting pattern Rounded edges to enhance personal safety Gamber-Johnson rugged construction and reliability Composite design for reduced weight and durability