Gamber-Johnson

This cradle is designed to accommodate the T1 handheld's stylus tether and large battery (sold separately) Easy to use one-handed operation: Insert bottom of the handheld into the cradle, push top of computer against latch button until latch engages To remove, push up on latch-button with thumb to disengage and pull computer out of the cradle Spring-loaded POGO style connector for charging; cable restraint system Access to all tablet control buttons and ports while tablet is cradled Keyed lock for theft deterrence AMPS mounting pattern Rounded edges to enhance personal safety

Mounts to existing seat bolts Limited forward seat travel Can be used with factory (OEM) console Support brace is strongly recommended Tubes and motion attachments sold separately

Attaches to the passenger side seat using the front seat bolts under the seat rails Angled step (included with base) can adjust to help position the pole system closer towards the console Support base is strongly recommended Minor limited motion of seat

Attaches to the sides of the transmission hump Will not fit in 2019 Chevrolet Silverado 1500 CLASSIC/GMC Sierra 1500 CLASSIC. See 7160-0509. Works with our 23" (58.42 cm) 7160-0086 and 29" (73.66 cm) 7160-0085 top plates only Does not work with trucks with OEM center console with shifter

Attaches to the passenger side seat using the front seat bolts under the seat rails Angled step (inlcuded with base) can adjust to help position the pole system closer towards the console Support brace is strongly recommended Limited seat movement forward Will not fit in 2019 Chevrolet Silverado 1500 CLASSIC/GMC Sierra 1500 CLASSIC. See 7160-0510.

Quickly install this base utilizing the front passenger seat bolts Vehicle base positions the lower pole of the computer mount closer to the transmission hump to provide more room by the passenger Includes an offset riser is included with the base to position the computer mount closer to the center Works around the HVAC duct that runs under the passenger seat Designed to not interfere with factory OEM console or seat levers

Vehicle base uses existing OEM bolts for a quick and easy install Additional holes created to allow guide pin on seat rail Positions the lower pole closer to the transmission hump to be as out of the way as possible Stable and rugged platform for your computer mount in your mobile office While this doesn't impact rearward travel of the passenger seat, forward seat travel is limited

Simple design sits on top of mounting legs of center seat using the OEM hardware Spacers to go in-between the Transmission Hump base and OEM legs are included with the base A metal covering mounts underneath the base providing coverage of exposed vehicle metal and helps keeps small items from falling under OEM carpet An offset riser is included to help with positioning your mount to the desired location Three (3) sets of mounting holes to place the lower pole

Complete your install look with the carpet covering (black) Carpet covering helps keep small items from going under the OEM carpet; i.e. pens and coins Four (4) slotted holes allow for fine tuning the console alignment between front seats Works with our 29" and 23" top plates as wells as the 7160-0548 console box Uses same seat bolts used for the center seat for ease of install

Mounts to existing seat bolts Limited forward seat travel Can be used with factory (OEM) console Support brace is strongly recommended Tubes and motion attachments sold separately Includes the DS-STEP to help position the mount closer to the driver and providing more room for the passenger

Compatible with the Panasonic Toughbook A3 tablet computer Panasonic Certified electronics Docking station design accommodates the A3 tablet hand strap with the extended battery Easy to use one-handed operation: Insert bottom of computer into the docking station, push top of computer against latch button until latch engages To remove, push up on latch-button with thumb to disengage and pull computer out of the docking station Access to all tablet control buttons and ports while tablet is docked Downward-facing I/O ports; integrated cable strain relief and cable management system Keyed lock for theft deterrence VESA 75mm mounting pattern Rounded edges to enhance personal safety Available with DUAL RF ( Item No. 7160-1416-02 )

Compatible with the Panasonic Toughbook A3 tablet computer Panasonic Certified electronics Docking station design accommodates the A3 tablet hand strap with the extended battery Easy to use one-handed operation: Insert bottom of computer into the docking station, push top of computer against latch button until latch engages To remove, push up on latch-button with thumb to disengage and pull computer out of the docking station Access to all tablet control buttons and ports while tablet is docked Downward-facing I/O ports; integrated cable strain relief and cable management system DUAL RF antenna pass through for reliable connectivity Keyed lock for theft deterrence VESA 75mm mounting pattern Rounded edges to enhance personal safety Available with NO RF ( Item No. 7160-1416-00 )

Compatible with the Panasonic Toughbook A3 tablet computer Cradle design accommodates the A3 tablet hand strap with the extended battery Easy to use one-handed operation: Insert bottom of computer into the cradle, push top of computer against latch button until latch engages To remove, push up on latch-button with thumb to disengage and pull computer out of the cradle Access to all tablet control buttons and ports while tablet is cradled Keyed lock for theft deterrence VESA 75mm mounting pattern Rounded edges to enhance personal safety 3-year limited warranty Available with DUAL RF ( Item No. 7160-1417-02 )

Compatible with Getac's B360 and B360 Pro rugged computers Getac Certified electronics Floating docking connector with steel guide pins to ensure a reliable connection even in the most rugged environments Front corner release latch, easily remove the computer by activating the latch Access to all computer control buttons and ports while the computer is docked Rear-facing I/O ports; integrated cable strain relief and cable management system Screen support for additional stability (included) Keyed lock for theft deterrence VESA 75mm mounting pattern Rounded edges to enhance personal safety 3-year limited warranty Available with TRI RF (7160-1431-03)

Compatible with Getac's B360 and B360 Pro rugged computers Getac Certified electronics Floating docking connector with steel guide pins to ensure a reliable connection even in the most rugged environments Front corner release latch, easily remove the computer by activating the latch Access to all computer control buttons and ports while the computer is docked Rear-facing I/O ports; integrated cable strain relief and cable management system Screen support for additional stability (included) Keyed lock for theft deterrence VESA 75mm mounting pattern Rounded edges to enhance personal safety 3-year limited warranty Available with NO RF (Item No. 7160-1431-00)

Compatible with Getac's B360 and B360 Pro rugged computers Front corner release latch, easily remove the computer by activating the latch Access to all computer control buttons and ports while the computer is docked Screen support for additional stability (included) Keyed lock for theft deterrence VESA 75mm mounting pattern Rounded edges to enhance personal safety 3-year limited warranty Available with TRI RF (Item No. 7160-1432-03)

Compatible with Getac's B360 and B360 Pro rugged computers Front corner release latch, easily remove the computer by activating the latch Access to all computer control buttons and ports while the computer is docked Screen support for additional stability (included) Keyed lock for theft deterrence VESA 75mm mounting pattern Rounded edges to enhance personal safety 3-year limited warranty Available with NO RF (7160-1432-00)

Narrowed width creates extra clearance for seat belts and gun holsters Simple and fast no-drill installation Sloped front increases visibility of radios and controls Knockouts for 12V outlets and accessories are included on the top, passenger side, and back side of the console 3-hole patterns on the top of the console allows for easy installation of motion attachments

Easily attaches to the passenger side seat rails Angled step (included with base) conveniently positions the pole system closer towards the console for ease of use Will not interfere with factory OEM console or seat levers Black powder coat finish for maximum corrosion resistance Heavy gauge steel construction for long-term durability

Easily mounts to the Chevrolet Bolt seat rail frame, with no drilling required Offset mounting step brings the pedestal solution close to the center console, increasing device accessibility and maintaining ample leg room for the front passenger Vertical front foot provides a level and stable mounting solution Mounting solution is customizable with numerous motion attachment options Constructed of heavy gauge steel and black powder coated for long term durability