Vehicle Equipment

Designed to MIL-STD 810G test procedures Small footprint - designed to maximize available space inside of vehicle Gamber-Johnson has worked with Panasonic to perform the appropriate tests needed to qualify a product as Toughbook Certified Front safety bracket and rear corners ensure proper alignment This cradle accommodates the optional modular expansion area on the Toughbook 54/55 computer Special access area for smart card reader makes it easy to insert and eject card Push button latch with keyed lock for theft deterrence: Push the latch to release Insert computer and push latch closed to secure computer Can be used with Motion Attachments with the VESA 75mm hole pattern only Rugged composite/steel construction with black powder coat finish for long-term durability

Designed for the Getac ZX70 tablet computer and backwards compatible with the Z710 tablet Kit includes Getac ZX70 charging cradle (7160-1135-01) and LIND isolated power adapter (16411) Easy to use one-handed operation: Insert bottom of computer into the cradle, push top of computer against latch button until latch engages To remove, push up on latch-button with thumb to disengage and pull computer out of the cradle POGO connector for reliable charging Power cable strain relief Cradle design accommodates rotating hand strap (sold separately) Access to all tablet control buttons and USB port while tablet is cradled Optional lock (keyed alike) for theft deterrence Rounded edges to enhance personal safety Gamber-Johnson rugged construction and reliability Extremely light-weight composite/aluminum design VESA 75 mounting pattern

Low profile, no-drill vehicle-specific console box 5 fasteners for mounting right to transmission hump, does not require a Leg Kit or MCS Top Plate Vertical, angled section accommodates 7.5” of mounting space and is designed to house full-sized radios Horizontal, low profile section accommodates 13” of mounting space and is designed to house radio control heads and accessories A removable top plate and center plate for easy radio installation and wire routing Ships with molded dash filler panels that gives the box a sleek appearance that blends in with the car’s aesthetics Five 12 Volt knock-outs (4 on the back and 1 on driver's side) USB and MP3 knock-outs from stock console, relocated on passenger side Computer can be mounted on top of the console box and has the ability to be centered or off-set towards the passenger on the “smiley face pattern” Heavy gauge steel, fully welded construction for long-term durability Black powdercoat finish for maximum corrosion resistance Will ship fully assembled (molded dash panels must be installed on-site) 3 faceplates and 3 filler panels are included Console box is not compatible with legacy Dodge Chargers

Low profile, no-drill vehicle-specific console box Shorter console box allows for more room when mounting weapons on the prisoner cage 5 fasteners for mounting right to transmission hump, does not require a Leg Kit or MCS Top Plate A removable top plate and center plate for easy radio installation and wire routing Ships with molded dash filler panels that gives the box a sleek appearance that blends in with the car’s aesthetics Five 12 Volt knock-outs (4 on the back and 1 on driver side) USB and MP3 knock-outs from stock console, relocated on passenger side Computer can be mounted on top of the console box and has the ability to be centered or off-set towards the passenger on the “smiley face pattern” Will ship fully assembled (molded dash panels must be installed on-site) 3 faceplates and 3 filler panels are included Console box is not compatible with legacy Dodge Chargers Heavy gauge steel, fully welded construction for long-term durability Black powdercoat finish for maximum corrosion resistance

Compatible with the Getac ZX10 tablet Cradle accommodates the tablet's card reader, extended battery, hand strap, stylus, barcode reader, and hard carry handle Access to all tablet control buttons and ports while the tablet is cradled One-hand docking and release for efficient use all day long Keyed lock for theft deterrence Gamber-Johnson rugged construction and reliability Composite design for reduced weight and durability VESA 75mm mounting pattern

Compatible with the Getac ZX10 tablet Cradle accommodates the tablet's card reader, extended battery, hand strap, stylus, barcode reader, and hard carry handle Access to all tablet control buttons and ports while the tablet is cradled One-hand docking and release for efficient use all day long Keyed lock for theft deterrence Gamber-Johnson rugged construction and reliability Composite design for reduced weight and durability VESA 75mm mounting pattern

Armrest flips up when not is use, saving space in the mobile workstation Mounts directly to the back of the console box The printer mount lid latches shut and can be used with a paddle lock for added security Paper deflector prevents paper from curling up and jamming Cable strain relief protects connector interface on the printer engine from damage Indicator lights and on/off button are easy to see and accessible when the cover is closed

The ALL-NEW 2020+ Ford Police Interceptor® Utility and 2020+ Ford Explorer pedestal kit creates a rugged and reliable foundation for your mobile workspace.

Compatible with the Getac UX10 tablet computer Kit includes (7160-1815-00) NO RF Cradle + (17057) Getac 120W Auto Power Adapter Cradle design accommodates the rotating hand strap with the extended battery, or the hard handle, RFID reader, and smartcard reader (sold separately) Easy to use one-handed operation: Insert bottom of computer into the cradle, push top of computer against latch button until latch engages To remove, push up on latch-button with thumb to disengage and pull computer out of the cradle Access to all tablet control buttons and ports while tablet is cradled Optional keyed lock for theft deterrence VESA 75mm mounting pattern Rounded edges to enhance personal safety

Designed for the Getac A140 tablet computer Cradle design accommodates tablet’s built-in rubber hand strap, stylus, and optional multi-function hard handle (sold separately) Access to all tablet control buttons, ports, smart card reader and front camera while tablet is cradled Easy to use one-handed operation: Insert bottom of computer into the cradle, push top of computer against latch button until latch engages To remove, push up on latch-button with thumb to disengage and pull computer out of the cradle Optional keyed lock for theft deterrence VESA 75mm mounting pattern Rounded edges to enhance personal safety Composite/aluminum design for reduced weight and durability

Vehicle specific design for a custom fit Shortened length provides extra clearance for weapon retrieval Installs easily with no drilling required Featuring a removable top plate for easy installation of radios and wire routing 3-hole pattern included on the top plate provides a secure mounting location for motion attachments OEM Power option can be relocated with supplied 2” faceplate or passenger side of console

Black Powdercoat finish for maximum corrosion resistance Heavy gauge steel construction for long-term durability Convenient flip-up lockbox and armrest Lockbox and armrest swivels 100 degrees from driver Flip-up lid allows for access to storage area Lid has latch-lock combination with easy latching Locking is done with barrel key Armrest pad adjusts about 1 inch backwards and 2 inches forward Armrest pad slides over latch - lock mechanism to help conceal it Interior storage area lined with padding to protect items and reduce noise 5 inch lower pole for mounting on the top plate or short versions console boxes with mounting slots

Black Powdercoat finish for maximum corrosion resistance Heavy gauge steel construction for long-term durability Convenient flip-up lockbox and armrest Lockbox and armrest swivels 100 degrees from driver Flip-up lid allows for access to storage area Lid has latch-lock combination with easy latching Locking is done with barrel key Armrest pad adjusts about 1 inch backwards and 2 inches forward Armrest pad slides over latch - lock mechanism to help conceal it Interior storage area lined with padding to protect items and reduce noise 7 inch lower pole for mounting on the top plate or short versions console boxes with mounting slots

Vehicle specific design for a custom fit Installs easily with no drilling required Featuring a removable top plate for easy installation of radios and wire routing 3-hole pattern included on the top plate provides a secure mounting location for motion attachments OEM Power option can be relocated with supplied 2” faceplate or passenger side of console

Cradle design accommodates tablet’s rotating hand strap (sold separately) Easy to use one-handed operation: Insert bottom of computer into the cradle, push top of computer against latch button until latch engages To remove, push up on latch-button with thumb to disengage and pull computer out of the cradle Access to all tablet control buttons and ports while tablet is cradled Optional keyed lock for theft deterrance Vesa 75mm mounting pattern Rounded edges to enhance personal safety

Shortened length provides extra clearance for weapon retrieval Installs easily with no drilling required Featuring a removable top plate for easy installation of radios and wire routing 3-hole pattern included on the top plate provides a secure mounting location for motion attachments OEM Power option can be relocated with supplied 2” faceplate or passenger side of console

Compatible with Panasonic Toughbook 54 and 55 computers Aluminum construction for strength and durability Captured key lock with auto-latching mechanism ensures user safety, protection and device security Ergonomic design for safety and single hand operation Minimal footprint for increased usable cabin space Universal mounting interface including VESA 75 for optimum compatibility with new and existing infrastructure Available as a kit with LIND power adapter

Compatible with Getac V110 convertible computer Cradle can be used in tablet or laptop position Rugged aluminum construction with black powder coat finish for long-term durability Front safety bracket helps align computer Built-in stylus holder Push button latch with keyed lock for theft deterrence: Push the latch Insert computer and push latch closed to secure computer Use External power supply: Lind Auto Adapter (Item No. 15110) Screen support is included with the dock