Vehicle Equipment

Small footprint designed to maximize available space Rear hooks and guide pins ensure proper alignment and docking connectivity Plate draws back into docking station when the computer is docked Docking station designed to accommodate optional VGA attachments Can be used with Gamber-Johnson motion attachments with the VESA 75mm hole pattern Rugged composite/steel construction with black powder coat finish for long-term durability Screen support is included with the dock Optional power supply bracket (7120-0736) to attach Getac power supply to the bottom of the dock (sold separately)

Heavy gauge steel, fully welded constructed for long-term durability. Black powdercoat finish for maximum corrosion resistance. Low profile vehicle specific console box. Six (6) fasteners for mounting to transmission hump. A removable top and center plate for easy radio installation and wire routing. 12 Volt plug insert located on passenger side. Factory USB and audio jack must be relocated using item no. 16648 & 15082 or 16648 & 15083 if you want to use them. Four (4) 12 Volt knockouts located on passenger side. Computer can be mounted on top of the console box and be off-set towards the passenger on the “smiley face pattern” or mounted to the driver side with the 3-bolt hole pattern. Console box ships fully assembled with 3 faceplates and 3 filler panels.

Lowered top plate maintains accessibility to optional rear HVAC controls (Ford 17A ordering option) Sloped front for ease of use and visibility of radio and siren controls Easy installation, no OEM parts to be removed Console sits low between the front seats to create a more comfortable workspace Mounting holes on top plate allow for easy installation of desired motion attachments Low profile creates ease of egress between seats Relocation faceplate for OEM 12V, USB, AUX 12V, and switch knockout included Cup holders are removable for easy cleaning Pen holder included for quick access and storage Included rear wire cover will meet up directly to Ford 85R if present

Compatible with the Getac F110 G6 tablet and all previous versions of the F110 tablet Cradle accommodates the tablet's mag strip reader and rotating hand strap Access to all tablet control buttons and ports while the tablet is cradled One-hand docking and release for efficient use all day long Keyed lock for theft deterrence Gamber-Johnson rugged construction and reliability Composite design for reduced weight and durability VESA 75mm mounting pattern

Compatible with the Dell Latitude 7230 Rugged Extreme tablet computer Accommodates the tablet’s hand strap or magnet mount attachment Access to all tablet control buttons and ports while the tablet is docked One-handed docking and release for efficient use all day long Keyed lock for theft deterrence Gamber-Johnson's rugged construction and reliability Composite design for reduced weight and durability VESA 75 mounting pattern with 1/4-20 mounting studs for easy mounting with Gamber-Johnson mounts and motion attachments

Must order as is. There are no substitutions.

Low profile vehicle-specific console box Five (5) fasteners for mounting right to transmission hump, does not require a Leg Kit or MCS Top Plate A removable top plate and center plate for easy radio installation and wire routing Ships with molded dash filler panels that gives the box a sleek appearance that blends in with the car’s aesthetics Five 12 Volt knock-outs (4 on the back and 1 on driver side) USB and MP3 knock-outs from stock console relocated on passenger side Computer can be mounted on top of the console box and has the ability to be off-set towards the passenger on the “smiley face pattern” or mounted to the driver side with the 3-bolt hole pattern Heavy gauge steel, fully welded construction for long-term durability Black powdercoat finish for maximum corrosion resistance Includes 3 faceplates and 3 filler panels Must order as is. There are no substitutions for accessories. Accessories may need to be assembled.

Low profile vehicle-specific console box Five (5) fasteners for mounting right to transmission hump, does not require a Leg Kit or MCS Top Plate A removable top and center plate for easy radio installation and wire routing Five (5), 12 Volt knock-outs located on passenger side USB and MP3 knock-outs from stock console relocated on passenger side Computer can be mounted on top of the console box and has the ability to be off-set towards the passenger on the “smiley face pattern” or mounted to the driver side with the 3-bolt hole pattern Heavy gauge steel, fully welded construction for long-term durability Black powder coat finish for maximum corrosion resistance Ships fully assembled with molded dash filler panels to give the box a sleek look for blending in with the car’s aesthetics Includes 3 faceplates and 3 filler panels

Compatible with the Getac K120 computer Cradle design accommodates tablet’s rotating hand strap (sold separately) Easy to use one-handed operation: Insert bottom of computer into the cradle, push top of computer against latch button until latch engages To remove, push up on latch-button with thumb to disengage and pull computer out of the cradle Access to all tablet control buttons and ports while tablet is cradled Optional keyed lock for theft deterrance Vesa 75mm mounting pattern Rounded edges to enhance personal safety

Vehicle specific design for a custom fit Shortened length provides extra clearance for weapon retrieval Installs easily with no drilling required Featuring a removable top plate for easy installation of radios and wire routing 3-hole pattern included on the top plate provides a secure mounting location for motion attachments Includes knockouts for one 12V, one USB, and OEM relocations Dual cup/pen holder is removable for easy cleaning

Low profile vehicle specific console box Six (6) fasteners for mounting to transmission hump A removable top and center plate for easy radio installation and wire routing. 12 Volt plug insert located on passenger side Factory USB and audio jack must be relocated using item no. 16648 & 15082 or 16648 & 15083 if you want to use them Four (4) 12 Volt knockouts located on passenger side Computer can be mounted on top of the console box and be off-set towards the passenger on the “smiley face pattern” or mounted to the driver side with the 3-bolt hole pattern Heavy gauge steel, fully welded constructed for long-term durability Black powder coat finish for maximum corrosion resistance Horizontal, low profile section Accommodates a mounting space of 11” (27.9 cm) long to house radio control heads, full-sized devices and accessories. The included cup holder uses 4.5" (11.43 cm) of that space Vertical, angled section Accommodates 7.5” (19.1 cm) of mounting space to house 1 to 2 full-sized radios 3 faceplates and 3 filler panels included Console box ships fully assembled (except for accessories)

Lowered top plate maintains accessibility to optional rear HVAC controls (Ford 17A ordering option) Sloped front for ease of use and visibility of radio and siren controls Easy installation, no OEM parts to be removed Console sits low between the front seats to create a more comfortable workspace Mounting holes on top plate allow for easy installation of desired motion attachments Low profile creates ease of egress between seats Relocation faceplate for OEM 12V, USB, AUX 12V, and switch knockout included Cup holders are removable for easy cleaning Pen holder included for quick access and storage Included rear wire cover will meet up directly to Ford 85R if present

Getac certified electronics Compatible with the Getac ZX10 tablet Docking station accommodates the tablet's card reader, extended battery, hand strap, stylus, barcode reader, and hard carry handle Access to all tablet control buttons and ports while the tablet is docked Docking connector gasket provides additional water resistance and protection. Downward-facing I/O ports; integrated cable strain relief and cable management system Floating docking connector for reliable connectivity in the most rugged environments One-hand docking and release for efficient use all day long Keyed lock for theft deterrence Gamber-Johnson rugged construction and reliability Composite design for reduced weight and durability VESA 75mm mounting pattern

Compatible with the Panasonic Toughbook A3 tablet computer Panasonic Certified electronics Docking station design accommodates the A3 tablet hand strap with the extended battery Easy to use one-handed operation: Insert bottom of computer into the docking station, push top of computer against latch button until latch engages To remove, push up on latch-button with thumb to disengage and pull computer out of the docking station Access to all tablet control buttons and ports while tablet is docked Downward-facing I/O ports; integrated cable strain relief and cable management system Keyed lock for theft deterrence VESA 75mm mounting pattern Rounded edges to enhance personal safety Available with DUAL RF ( Item No. 7160-1416-02 )

Vehicle specific design for a custom fit Dual cup/pen holder is removable for easy cleaning Installs easily with no drilling required Featuring a removable top plate for easy installation of radios and wire routing 3-hole pattern included on the top plate provides a secure mounting location for motion attachments Includes knockouts for one 12V, one USB, and OEM relocations

Leg kit mounts to existing center seat bolts located along transmission hump Top plate on console allows for mounting a motion attachment or close-to-dash Top plate and spreader bar in middle are removable to easy installing of console and running wiring Two (2) mounting holes on console top plate made for motion attachments (driver side and passenger side) Console is low profile between the seats to create a comfortable work environment Ships fully assembled (except for console accessories i.e. faceplate, 12V outlets, etc.) Three (3) faceplate and three (3) fillers are included per console Threaded PEMS on side and rear accommodate various armrests

Designed for the Getac A140 tablet computer Cradle design accommodates tablet’s built-in rubber hand strap, stylus, and optional multi-function hard handle (sold separately) Access to all tablet control buttons, ports, smart card reader and front camera while tablet is cradled Easy to use one-handed operation: Insert bottom of computer into the cradle, push top of computer against latch button until latch engages To remove, push up on latch-button with thumb to disengage and pull computer out of the cradle Optional keyed lock for theft deterrence Vesa 75mm mounting pattern Rounded edges to enhance personal safety Composite/aluminum design for reduced weight and durability

Low profile vehicle-specific console box Five (5) fasteners for mounting right to transmission hump, does not require a Leg Kit or MCS Top Plate A removable top plate and center plate for easy radio installation and wire routing Ships with molded dash filler panels that gives the box a sleek appearance that blends in with the car’s aesthetics Five (4) 12 Volt knock-outs (4 on the back and 1 on driver side) USB and MP3 knock-outs from stock console, relocated on passenger side Computer can be mounted on top of the console box and has the ability to be off-set towards the passenger on the “smiley face pattern” or mounted to the driver side with the 3-bolt hole pattern Heavy gauge steel, fully welded construction for long-term durability Black powdercoat finish for maximum corrosion resistance Console box ships fully assembled (molded dash panels must be installed on-site) Includes 3 faceplates and 3 filler panels Must order as is. There are no substitutions for accessories. Accessories may need to be assembled.

Low profile vehicle specific console box Five (5) fasteners for mounting right to transmission hump, does not require a Leg Kit or MCS Top Plate A removable top and center plate for easy radio installation and wire routing Five (5), 12 Volt knock-outs located on passenger side USB and MP3 knock-outs from stock console relocated on passenger side Computer can be mounted on top of the console box and has the ability to be off-set towards the passenger on the “smiley face pattern” or mounted to the driver side with the 3-bolt hole pattern Box ships fully assembled with molded dash filler panels to give the box a sleek look for blending in with the car’s aesthetics Includes 3 faceplates and 3 filler panels Heavy gauge steel, fully welded construction for long-term durability Black powder coat finish for maximum corrosion resistance Must order as is. There are no substitutions for accessories. Accessories may need to be assembled.