Vehicle Equipment

Attaches to the passenger side floor, under seat rails Can be used with factory installed console A Support Brace (Item no. 7160-0230) is highly recommended. Heavy gauge steel construction for long-term durability Black powdercoat finish for maximum corrosion resistance Note : Due to inboard seat rail only having one pre-drilled hole, we strongly recommend drilling another hole due to the weight of the equipment is on that rail. Rearward travel of the passenger seat is not affected, however there is limited forward seat travel.

DS-STEP built into the base. Heavy gauge steel construction for long-term durability. Black powder coat finish for maximum corrosion resistance. Base attaches to inboard and outboard passenger side seat rails. Forward seat movement is affected – little to no movement. Support Brace (Item No. 7160-0230) is recommended. Base bolts to passenger side seat rails in existing holes. Seat does NOT have to be removed.

Mounts to existing seat bolts Limited forward seat travel Can be used with factory (OEM) console Support brace is strongly recommended Tubes and motion attachments sold separately

Angled step moves pole away from passenger leg space Will not interfere with levers or factory installed consoles One Off-set Universal Mounting Step ( DS-STEP ) is already included with this vehicle base. However, additional Off-set Universal Mounting Steps can be ordered to stack on top of each other if needed. Heavy gauge steel construction for long-term durability Black powder coat finish for maximum corrosion resistance A support brace ( 7160-0230 ) is highly recommended. An existing bolt (heater box mounting bolt) in the vehicle can be used as an attachment point for the support brace.

Angled step moves pole away from passenger leg space Will not interfere with levers or factory installed consoles Heavy gauge steel construction for long-term durability Black powdercoat finish for maximum corrosion resistance One Off set Universal Mounting Step ( DS-STEP ) is already included with this vehicle base. However, additional Off set Universal Mounting Steps can be ordered to stack on top of each other if needed. A Support Brace ( 7160-0230 ) is highly recommended

Mounts to existing seat bolts Limited forward seat travel Can be used with factory (OEM) console Support brace is strongly recommended Tubes and motion attachments sold separately Includes the DS-STEP to help position the mount closer to the driver and providing more room for the passenger

Locking lid with barrel key lock Ideal for weapons, keys and other miscellaneous items Heavy gauge steel construction for long-term durability Black powdercoat finish for maximum corrosion resistance

Installs in minutes using the inboard and outboard passenger side seat studs with no drilling required Included is one (1) Offset Universal Mounting Step ( DS-STEP ). Additional Offset Universal Mounting Steps can be ordered to stack on top of each other if needed. A Support Brace ( 7160-0230 ) is highly recommended Heavy gauge steel construction for long-term durability Black powdercoat finish for maximum corrosion resistance

Base attaches to inboard and outboard passenger side seat rails Riser (included) bolts on to base for added height and moves pole closer to the center of the vehicle Forward seat movement is affected slightly Heavy gauge steel construction for long-term durability Black powder coat finish for maximum corrosion resistance Support brace recommended (item no. 7160-0230)

Base is designed to be secured between the passenger seat pedestal and the seat rails. Installs in minutes with no drilling required Includes one (1) Offset Universal Mounting Step ( DS-STEP ). Additional Offset Universal Mounting Steps can be ordered to stack on top of each other if needed. Support Brace ( 7160-0231 ) is highly recommended Heavy gauge steel construction for long-term durability Black powdercoat finish for maximum corrosion resistance

This cradle is designed to accommodate the T1 handheld's stylus tether and large battery (sold separately) Easy to use one-handed operation: Insert bottom of the handheld into the cradle, push top of computer against latch button until latch engages To remove, push up on latch-button with thumb to disengage and pull computer out of the cradle Spring-loaded POGO style connector for charging; cable restraint system Access to all tablet control buttons and ports while tablet is cradled Keyed lock for theft deterrence AMPS mounting pattern Rounded edges to enhance personal safety

Installs in minutes with no drilling required Attaches to the passenger side floor, under the seat Won’t interfere with levers or factory-installed consoles located on transmission hump Won’t interfere with passenger leg space Includes one (1) Offset Universal Mounting Step (Item No. DS-STEP). Additional Offset Universal Mounting Steps can be ordered to stack on top of each other if needed. For extra stability a Support Brace ( 7160-0230 ) is recommended

Installs in minutes using the inboard and outboard passenger side seat studs with no drilling required Includes one (1) Offset Universal Mounting Step ( DS-STEP ). Additional Offset Universal Mounting Steps can be ordered to stack on top of each other if needed. Will not interfere with levers or factory installed console Support Brace ( 7160-0230 ) is highly recommended Heavy gauge steel construction for long-term durability Black powder coat finish for maximum corrosion resistance Note: Rearward travel of the passenger seat is not affected, however, forward seat travel is slightly affected

Attaches to the passenger side seat using the front seat bolts under the seat rails Angled step (included with base) can adjust to help position the pole system closer towards the console Support base is strongly recommended Minor limited motion of seat

Easily attaches to the passenger side seat rails Angled step (included with base) conveniently positions the pole system closer towards the console for ease of use Will not interfere with factory OEM console or seat levers Black powder coat finish for maximum corrosion resistance Heavy gauge steel construction for long-term durability

Lid latches in place without needing to be locked Lid can be secured with the push button lock for added security Ideal for securing keys and other miscellaneous items Black powder coat finish for maximum corrosion resistance Heavy gauge steel construction for long-term durability

Conveniently holds printer and paper in separate trays New wire draw latch provides a secure fit to reduce vibration noise Bolt-on cable restraint provided a cable management options if desired Paper roll cut-out allows for vertical orientation as well as standard horizontal orientation Printer can be easily removed from the mount for use outside of the vehicle Constructed of heavy gauge steel and powder coated for long term durability

Locking lid with barrel key lock Ideal for weapons, keys and other miscellaneous items Heavy gauge steel construction for long-term durability Black powdercoat finish for maximum corrosion resistance

Bracket mounted to pole gusset allows for additional attachment to seat frame Base works with most existing work boxes Attaches to the passenger side inner front and back seat studs Does not interfere with the passenger leg space Does not require drilling Heavy gauge steel construction for long-term durability Black powdercoat finish for maximum corrosion resistance

Attaches to the passenger side seat using the front seat bolts under the seat rails Angled step (inlcuded with base) can adjust to help position the pole system closer towards the console Support brace is strongly recommended Limited seat movement forward Will not fit in 2019 Chevrolet Silverado 1500 CLASSIC/GMC Sierra 1500 CLASSIC. See 7160-0510.