Firefighters

100% Cotton Twill, 5.6-oz, easy care finish NFPA 1975 (2014) certified Firefly thread used throughout construction Any and all repairs and alterations must be performed by 5.11 or an authorized service representative

Comfort waist 67% polyester/33% cotton Flex-Tac canvas, 6.4-oz., Teflon finish Cargo pockets with zipper closures and internal magazine storage.

Back magazine pocket on wearer's left. 5.11 signature fade-resistant rear strap. 71% polyester/29% cotton FlexLite ripstop, 5.4-oz., Teflon finish

100% Cotton Twill, 7.8 oz, Tough Cotton finish NFPA 1975 (2014) certified Self-adjusting waistband with gripper tape

Comfort waistband w/ 4 way stretch fabric panel Media drop pocket/cell phone ready Pocket reinforcement at front hand pocket edge Dual back welt pockets

Lightweight, durabe fabric Comfort waistband w/ 4 way stretch fabric panel Nine pockets, including fual mag & cargo pockets Nylon 6 re-enforcement in mag & utility pocket

Flex-Tac PDU STRYKE fabric w/TEFLON finish Cargo pockets, welted back pockets & lower leg pockets Comfort waistband w/stretch panels & Gripper elastic inside

Durable, comfortable women's covert cargo pants Comfortable for everyday, all-day wear Extra pockets sized for tactical use

Lightweight, durable women's EMS pants Enhanced comfort, range of motion, and storage options Extra pockets sized and placed for EMS use

Lightweight, durable women's tactical pants Ideal for operational or recreational outdoor demands Extra pockets sized for tactical use

Compatible with the Panasonic Toughbook A3 tablet computer Cradle design accommodates the A3 tablet hand strap with the extended battery Easy to use one-handed operation: Insert bottom of computer into the cradle, push top of computer against latch button until latch engages To remove, push up on latch-button with thumb to disengage and pull computer out of the cradle Access to all tablet control buttons and ports while tablet is cradled Keyed lock for theft deterrence VESA 75mm mounting pattern Rounded edges to enhance personal safety 3-year limited warranty Available with DUAL RF ( Item No. 7160-1417-02 )

Compatible with the Panasonic Toughbook A3 tablet computer Panasonic Certified electronics Docking station design accommodates the A3 tablet hand strap with the extended battery Easy to use one-handed operation: Insert bottom of computer into the docking station, push top of computer against latch button until latch engages To remove, push up on latch-button with thumb to disengage and pull computer out of the docking station Access to all tablet control buttons and ports while tablet is docked Downward-facing I/O ports; integrated cable strain relief and cable management system DUAL RF antenna pass through for reliable connectivity Keyed lock for theft deterrence VESA 75mm mounting pattern Rounded edges to enhance personal safety Available with NO RF ( Item No. 7160-1416-00 )

Compatible with the Panasonic Toughbook A3 tablet computer Panasonic Certified electronics Docking station design accommodates the A3 tablet hand strap with the extended battery Easy to use one-handed operation: Insert bottom of computer into the docking station, push top of computer against latch button until latch engages To remove, push up on latch-button with thumb to disengage and pull computer out of the docking station Access to all tablet control buttons and ports while tablet is docked Downward-facing I/O ports; integrated cable strain relief and cable management system Keyed lock for theft deterrence VESA 75mm mounting pattern Rounded edges to enhance personal safety Available with DUAL RF ( Item No. 7160-1416-02 )

Mounts to existing seat bolts Limited forward seat travel Can be used with factory (OEM) console Support brace is strongly recommended Tubes and motion attachments sold separately Includes the DS-STEP to help position the mount closer to the driver and providing more room for the passenger

Complete your install look with the carpet covering (black) Carpet covering helps keep small items from going under the OEM carpet; i.e. pens and coins Four (4) slotted holes allow for fine tuning the console alignment between front seats Works with our 29" and 23" top plates as wells as the 7160-0548 console box Uses same seat bolts used for the center seat for ease of install

Simple design sits on top of mounting legs of center seat using the OEM hardware Spacers to go in-between the Transmission Hump base and OEM legs are included with the base A metal covering mounts underneath the base providing coverage of exposed vehicle metal and helps keeps small items from falling under OEM carpet An offset riser is included to help with positioning your mount to the desired location Three (3) sets of mounting holes to place the lower pole

Vehicle base uses existing OEM bolts for a quick and easy install Additional holes created to allow guide pin on seat rail Positions the lower pole closer to the transmission hump to be as out of the way as possible Stable and rugged platform for your computer mount in your mobile office While this doesn't impact rearward travel of the passenger seat, forward seat travel is limited

Quickly install this base utilizing the front passenger seat bolts Vehicle base positions the lower pole of the computer mount closer to the transmission hump to provide more room by the passenger Includes an offset riser is included with the base to position the computer mount closer to the center Works around the HVAC duct that runs under the passenger seat Designed to not interfere with factory OEM console or seat levers

Attaches to the passenger side seat using the front seat bolts under the seat rails Angled step (inlcuded with base) can adjust to help position the pole system closer towards the console Support brace is strongly recommended Limited seat movement forward Will not fit in 2019 Chevrolet Silverado 1500 CLASSIC/GMC Sierra 1500 CLASSIC. See 7160-0510.

Attaches to the sides of the transmission hump Will not fit in 2019 Chevrolet Silverado 1500 CLASSIC/GMC Sierra 1500 CLASSIC. See 7160-0509. Works with our 23" (58.42 cm) 7160-0086 and 29" (73.66 cm) 7160-0085 top plates only Does not work with trucks with OEM center console with shifter